Fab Productions Tech Rider
Updated March 2026
Questions please contact:
production@fabproductionsllc.com
(407) 927-0048
Overview
We operate as a 5 piece band. All performers sing lead & backing vocals.
● 2x Guitar + Vocals
● Bass + Vocals
● Keys + Vocals
● Drums + Vocals
Mixer / Splits
Onstage will be our XR-18 mixer and split tails to front of house mixer. Our tails are 8ft, with
additional 30ft available if needed (please request in advance)
(Mostly) Silent Stage
All performers use our own IEM for onstage monitoring. Please strike any wedges from the
stage prior to load-in. Guitars, bass, and keyboards are ampless with DI to our mixer / splitter.
Drums and percussion are acoustic and will be mic’d.
Stage Plot
Note: Drum mics for toms and overhead will not route through our splitter and can go directly to
FOH
Stage Plot
Note: Drum mics for toms and overhead will not route through our splitter and can go directly to
FOH
Input
Item
Location
Notes
1
Kick drum
Upstage Center
Band provides mic
2
Snare
Upstage Center
Band provides mic
3
hihat
Upstage Center
Band provides mic
4
Bass
Stage Right
DI
5
Gtr 1
Center
DI
6
Gtr 2
Stage Left
DI
7
Acoustic Gtr
Stage Left
DI
8
Keyboard 1
Upstage Right
DI
9
Keyboard 2
Upstage Right
DI
10
Vocal R (bass)
Stage Right
Band provides mic
11
Vocal C (gtr)
Center
Band provides mic
12
Vocal L (gtr)
Stage Left
Band provides mic
13
Vocal Keys
Upstage Right
Band provides mic
14
Vocal Drums
Upstage Center
Band provides mic
15
16
17
Tracks L
Upstage Left
DI
18
Tracks R
Upstage Left
DI
Video
For our production, we run synchronized video from a laptop located at the Drummer’s stage
position (Upstage center left - see stage plot above)
Requirements:
● Projection or LED wall capable of 1080p video via HDMI (1920x1080).
● HDMI cable at drummer’s stage left side OR HDMI female port within 25 feet of
drummer’s stage left side.
● Signal Conversion: If the venue's infrastructure requires SDI or HDBaseT conversion to
reach the projector, the venue must provide the necessary converters and cabling to
accept a standard HDMI male output from our laptop.
● Scaling: Please disable any "Overscan" settings on the display hardware to ensure the
full 1080p frame is visible without cropping.